Wednesday, 15 October 2014

Ac voltmeter (0-600 volt)

AC VOLT METER USEING PIC 16F676

Herr to measure the mains AC
voltage and the output voltage of the sine wave as well as raw supply.All I
had to do was to convert the mains AC to DC,
filter it and measure the peak voltage. Of course
this had to be scaled down to a safe range for
the microcontroller. The RMS voltage for a sine
wave is equal to 0.707 (to 3 decimal places) the
peak voltage.
The design was based on the Microchip
PIC16F676. The variable resistor is adjusted so that the
reading of my AC voltmeter matches that of a
commercial digital multymeter .
This is a sort of calibration.

CAUTION: THIS CIRCUIT IS NOT ISOLATED
FROM THE MAINS AC AND HAS THE
POTENTIAL TO BE LETHAL. YOU MUST BE
VERY CAREFUL IF YOU ARE GOING TO USE
THIS DESIGN. DO NOT ATTEMPT IF
INEXPERIENCED. I CANNOT AND WILL NOT BE
HELD RESPONSIBLE FOR ANY DAMAGE DONE
WHILE USING THIS CIRCUIT.

Posted by at

18 comments:

  1. Manoj Arakulam1 December 2015 at 09:34

    Have you any Hex File for it?

    ReplyDelete
    Replies
    1. Technology Luster2 December 2015 at 10:36

      yes Mr.Manoj Arakulam
      i have it source file & hex file both.
      source file are H-tech c, micro & CCS C also.
      whats ur need ?
      cont me on
      shivendrakumarsahu@gmail.com
      with ur what's app no.

      Delete
    2. Manoj Arakulam2 December 2015 at 11:13

      Do you have the same?

      https://www.youtube.com/watch?v=-tBW-rLoH-s

      If yes, I really like it Also I want....

      Delete
    3. Technology Luster14 December 2015 at 05:33

      yes
      have the same .

      Delete
  2. Unknown22 February 2016 at 10:34

    Sir send hex fill and ckt

    ReplyDelete
    Replies
    1. Technology Luster27 February 2016 at 09:17

      i have it source file & hex file both.
      source file are H-tech c, micro & CCS C also.
      whats ur need ?
      cont me on
      shivendrakumarsahu@gmail.com
      with ur what's app no.

      Delete
  3. Unknown22 February 2016 at 10:34

    Sir send hex fill and ckt

    ReplyDelete
  4. Fault 5525 January 2017 at 02:28

    hex pls

    ReplyDelete
  5. krdewan12.blogspot.com18 April 2017 at 13:51

    krdewan12@gmail.com plz hex

    ReplyDelete
  6. Technology Luster6 February 2018 at 09:21

    call me on 8960401808

    ReplyDelete
  7. theres raj8 June 2018 at 09:58

    Cost of the hex,
    theresraj57@gmail.com

    ReplyDelete
  8. Mohammad Nure Alam14 December 2018 at 10:23

    source file are MikroC
    smart.dhaka@gmail.com

    ReplyDelete
  9. Unknown4 February 2019 at 10:05

    Please send me copmlete project.
    Tanveer2970@yahoo.com

    ReplyDelete
  10. Movie pro25 March 2019 at 08:13


    Please send me copmlete project.
    dineshbdinesh@gmail.com

    ReplyDelete
  11. Movie pro25 March 2019 at 08:15

    send 16f676 voltmeter c filed
    dinehbdinesh@gmail.com

    ReplyDelete
  12. Unknown5 April 2019 at 21:39

    Dear sir,
    I need hex bin file for AC voltmeter from 0 to 600 volt on PIC16F676. I have universal IC pic programmer. I try to make AC voltmeter it myself. I am newly electronics technical person. If possible give me the schematics for that. I will be happy for your help. Thanks "Hamid" oppof1shamid@gmail.com

    ReplyDelete
  13. Unknown2 September 2019 at 14:02

    Please send me copmlete project with the hex file and very thanks.

    ReplyDelete
  14. Unknown2 September 2019 at 14:05


    Please send me copmlete project with the hex file and very thanks.

    Reply haniadnan1983@gmail.com(Google)

    ReplyDelete

Subscribe to: Post Comments (Atom)